Français | English
Back to homepage
Mini dome

ini dome

The MINI DOME from TEB is a Fixed Dome, High Resolution, Vandal Resistant, Low Voltage, Colour/Monochrome camera.
It delivers clear images of events and is the ideal surveillance solution for monitoring areas prone to damaging physical attack. Its solid die cast aluminium case and polycarbonate cover meets the need for a completely integrated, rugged, high-resolution and high-sensitivity camera. Available in surface, ceiling and wall mount, the MINI DOME is discreet and stylish and comes ready assembled for fast, easy installation.
Compact in design the MINI DOME is suitable in many internal and external environments for commercial and industrial applications.


TECHNICAL SPECIFICATION
System CCIR/PAL
Imager 1/3" Sony Super HAD Interline Transfer CCD
Active picture elements Ca. 440.000, (H) 752 x (V) 582 Pixels
Horizontal resolution 480 TV lines
Sensitivity at 50% video signal 0.5Lux (0.32Lux) at colour; 0.24Lux (0.15Lux) at B&W; at F1.2 each (AGC-Turbo); VT measurement result
Signal-to-noise ratio 48dB
Gamma correction Approx. 0.45
Synchronization Internal/Line-lock (automatic detection depend on power source)
Automatic shutter control (AES) 1/50 ~ 1/100.000sec.
Automatic gain control (AGC) Normal/Turbo (+6dB)
Backlight compensation (BLC) ON/OFF switchable
White balance (ATW) 2000 ~ 8000K, Automatic
Internal adjustments 8 Dip switches: Internal/Line-lock synchronization, ELC/ALC (manual/motorized Iris),
BLC ON/OFF, AGC Normal/Turbo, Flickerless ON/OFF, Auto/manual Day/Night mode
2 Potentiometers : Level for DC controlled iris,
V. phase adjustment (220° min. adjustable)
Lens F1.2/F2.0~360 / 3.8~9.5mm with galvanometer controlled iris
Focus range 0.15m ~ oo
Horizontal angle of view 74,2° ~ 30°
Video output 1Vp-p, CVBS, 75ohms
Supply voltage 12VDC (10.5~30VDC); 24VAC (12~29VAC)
Power consumption Approx. 3 Watts
Cable entry 3/4" and 1/2" thread for conduit glands, lock stopper included
Cable connection Video (BNC), Power (2-pin screw terminal)
Housing Die-cast aluminium with clear polycarbonate bubble
Colour Pantone Coolgray 1C
Bubble Vandal resistant 3mm clear polycarbonate bubble with inner liner
Protection rating IP65 (at installation according to the manual)
Temperature range -10°C ~ +50°C (-30° with heater kit)
Thermostat switching points +2.4°C ON / +22°C OFF (heater kit 12V, optional)
Dimensions (HxWxD) 130 x 130 x 100 (mm)
Weight Approx. 750g
Parts supplied Mounting kit, 1/2" gland, Blind covers, Torx wrench key



 
© TEB 2005/2006 - About this website - Confidentiality - Site map